top of page

GFIR TF8 Swing Diameter Over Bed: ⌀400 mm Swing Diameter Over Slide: ⌀180 mm X/Z Travel: 250/400 mm Spindle Through Hole: ⌀40 mm Spindle Speed: 3000 rpm X/Z Rapid Speed: 8/10 m/min X/Z Motor Torque: 4/6 N.m Clamping: Pneumatic Tailstock Quill Diameter/Travel: ⌀52 mm / 120 mm Tools: Electric tool post and gang type Tool Shank Size: 20x20 mm Boring Tool Diameter: ⌀20 mm Fixture: Collet Roundness: 0.005 mm Surface Roughness: Ra 1.6 Total Power Consumption: 9.12 KVA X/Z Positioning Accuracy: 0.016/0.018 mm X/Z Repeatability Accuracy: 0.006/0.006 mm Overall Dimensions: 2000x1250x1650 mm Machine Weight: 1250 kg 1 The structural features of machine tool 1.1 The machine adopts horizontal flat bed structure,the surface of guide way is processed by precise grinding after quench treatment,has good accuracy and accuracy maintenance; 1.2 The machine adopts independent spindle structure with high precise bearings,high spindle speed、small thermal deformation; 1.3 Adopt the integral bed foot and semi-encolsed protection structure,the rigidity is better and easy to use tailstock; 1.4 Electromechanical and hydraulic integrated design with compact structure and elegant appearance;      1.5 Can equip gang type tool post、4 station vertical electric tool post; 1.6 Vertical and horizontal drive adopt the high-performance AC servo motor with high positioning accuracy、flexible and reliable action; 1.7 Adopt automatic centralized lubrication device,lubrication is fully reliable; 1.8 The control system uses well-known CNC system in domestic and abroad,which is reliable to perform and easy to operate.The machine meets the ergonomic design and requirements and the maintenance cost is lower. 2 The purpose of the machine tool and its scope of application 2.1 In addition to the basic functions of turning, grooving and chamfering, the machine tool can also perform various metric and inch internal and external thread processing, as well as drilling, expansion, reaming, rolling and other processing; 2.2 It is able to process cylindrical, conical, stepped, spherical and other various curved surfaces, such as short-axis (or disc) parts with complex geometric shapes, many sizes and high precision requirements; 2.3 Suitable for processing bars with the diameter below Φ40mm(spindle through hole),disks and short shaft parts with a diameter below Φ350mm(this range may vary depend on the fixture); 2.4 Suitable for the production of single or medium and small batches of non-ferrous and ferrous metal workpieces of small and medium specifications;; 2.5 The machine tool is suitable for the automated production of machinery, instruments, light industry, electronics, medical instruments and other industries.

GFIR TF10 Swing Diameter Over Bed: ⌀560 mm Swing Diameter Over Slide: ⌀320 mm Max. Turning Length: 1000 mm X/Z Travel: 270/1000 mm Spindle Through Hole Diameter: ⌀92 mm Boring Tool Diameter: ⌀32 mm Roundness: 0.005 mm Surface Roughness (for #45 steel): Ra 1.6 Spindle Speed: 2500 rpm Fixture: 10' manual chuck Total Power Consumption: 11 KVA X/Z Rapid Speed: 6/8 m/min X/Z Positioning Accuracy: 0.018/0.022 mm X/Z Repeatability Accuracy: 0.006/0.008 mm Overall Dimensions: 2840 mm x 2040 mm x 1800 mm X/Z Motor Torque: 7.5/10 N.m Machine Weight: 2800 kg 1 The structural features of machine tool 1.1 The machine adopts horizontal flat bed structure,the surface of guide way is processed by precise grinding after quench treatment,has good accuracy and accuracy maintenance; 1.2 The machine adopts independent spindle structure with high precise bearings,high spindle speed、small thermal deformation; 1.3 Adopt the split casting base and semi-enclosed protective structure,the whole machine has a high rigidity and easy to use tailstock ;     1.4 It can equip with standard 4 station vertical electric tool post or 6 station horizontal electric tool post or gang type tool post; 1.5 Easy to operate,the machine meets the ergonomic design and requirements,the maintenance cost is lower; 1.6 It is suitable for processing all kinds of shafts、disc and small batch parts with complex shapes,and it is more suitable for the mass production of parts with high precision and size consistency. 2 The purpose of the machine tool and its scope of application 2.1 In addition to the basic functions of turning, grooving and chamfering, the machine tool can also perform various metric and inch internal and external thread processing, as well as drilling, expansion, reaming, rolling and other processing; 2.2 It is able to process cylindrical, conical, stepped, spherical and other various curved surfaces, such as short-axis (or disc) parts with complex geometric shapes, many sizes and high precision requirements; 2.3 Suitable for processing bars with the diameter below Φ92mm(spindle through hole),length within 1000mm,disks and short shaft parts with a diameter below Φ350mm(this range may vary depend on the fixture); 2.4 Suitable for the production of single or medium and small batches of non-ferrous and ferrous metal workpieces of small and medium specifications;; 2.5 The machine tool is suitable for the automated production of machinery, instruments, light industry, electronics, medical instruments and other industries.

bottom of page